Skip to content
You are here > Home > Your Ministry > Ontario Building Code > Appeals & Approvals > Minister's Rulings > MR94-07-07

Follow us

MR94-07-07

Email this page

BUILDING CODE ACT, 1992
 

RULING OF THE MINISTER OF MUNICIPAL AFFAIRS AND HOUSING

# 94-07-07- (12422-R)

Revised on March 24, 2000


Pursuant to Section 29(1)(a) of the Building Code Act, 1992, , the Director of the Housing Development and Buildings Branch, as delegate of the Minister of Municipal Affairs and Housing (Minister), hereby approves the use of ACFoam Supreme™/Energy Shield®, subject to the following terms and conditions:

  1. MANUFACTURER/AGENT
  2. Atlas Roofing Corporation
    1775 The Exchange
    Suite 160
    Atlanta, Georgia
    U.S.A. 30339


    Tel: (770) 933-4479
    Fax: (770) 952-3170


  3. MANUFACTURING FACILITIES

    Atlas Roofing Corporation
    817 Spangler Road Camp Hill
    Pennsylvania U.S.A.

    Atlas Roofing Corporation
    55 Akron Road
    Etobicoke, ON
    M8W 1T3


  4. SPECIFIC CONDITIONS

    (a) The use of ACFoam Supreme™/Energy Shield® is approved in respect of the insulation material standards contained in Article 9.25.2.3. of Ontario Regulation 403/97, as amended or remade from time to time (the Ontario Building Code);

    (b) The use of ACFoam Supreme™/Energy Shield® must comply with the Building Code Act, 1992,; and, except as specifically provided otherwise in this Ruling, with the Ontario Building Code;

    (c) The use of ACFoam Supreme™/Energy Shield® shall be in accordance with Canadian Construction Materials Centre (CCMC) Evaluation Report 12422-R, (the Evaluation Report) issued on August 28, 1992 and re-evaluated on October 28, 1999, provided that references in the Evaluation Report to Articles 3.1.5.11., 3.2.3.7., 9.23.17.4., 9.25.1.2. and 9.25.2.2. and Tables 9.23.16.2.A. and 9.25.1.2. of the National Building Code of Canada, 1995 shall be deemed to be references to Articles 3.1.5.11., 3.2.3.7., 9.23.17.4., 9.25.1.2. and 9.25.2.3. and Tables 9.23.16.2.A. and 9.25.1.2. of the Ontario Building Code;

    (d) A copy of this Ruling shall be attached to the application for a building permit; and,

    (e) This Ruling is valid only for ACFoam Supreme™/Energy Shield®manufactured at the facilities outlined in Section 2. (Manufacturing Facilities) of this Ruling.


  5. GENERAL CONDITIONS

    The Minister or his/her delegate may amend or revoke this Ruling if:

    (a) the Evaluation Report is amended by the CCMC;

    (b) the Evaluation Report expires in accordance with the CCMC's General Conditions for Evaluation Reports;

    (c) the Evaluation Report is rendered void in accordance with the CCMC's General Conditions for Evaluation Reports by reason of alterations to the product or relocation of manufacturing facilities, described in the Evaluation Report, without prior agreement by the CCMC;

    (d) the Evaluation Report is withdrawn by the CCMC in accordance with the CCMC's General Conditions for Evaluation Reports where, in the opinion of the CCMC:

    1. the level of performance, in-situ, of the product described in the Evaluation Report is unsatisfactory;

    2. the proponent of such product fails to fulfil its obligations as set out in the CCMC's General Conditions for Evaluation Reports; or

    3. such product may pose any danger to the health or safety of the user of such product;

    (e) the Minister or his/her delegate determines that the use of the material, system or building design authorized by this Ruling:

    1. will not comply with the Building Code Act, 1992, or any relevant law as they may be amended or reenacted from time to time; or

    2. provides an unsatisfactory level of performance, in situ; or

    (f) any Ontario Building Code provision relevant to this Ruling is amended or remade.







Dated at Toronto this 24th day in the month of March in the year 2000 on the behalf of:



__________________________________________________________
ANN BOROOAH, DIRECTOR
HOUSING DEVELOPMENT AND BUILDINGS BRANCH