Skip to content
You are here > Home > Your Ministry > Ontario Building Code > Appeals & Approvals > Minister's Rulings > MR99-12-071-(12893-R)

Follow us

MR99-12-071-(12893-R)

Email this page

BUILDING CODE ACT, 1992

RULING OF THE MINISTER OF HOUSING

RULING: 99-12-071-(12893-R)


Pursuant to Section 29(1)(a) of the Building Code Act, 1992, the Director of the Housing Development and Buildings Branch, as delegate of the Minister of Municipal Affairs and Housing (Minister), hereby approves the use of Airmetic® 0223/Heatlok® 0240 - Air Barrier Material, subject to the following terms and conditions:

MANUFACTURER/AGENT

Demilec Inc.
870, Curé-Boivin
Boisbriand, Québec
J7G 2A7

Tel: (450) 437-0123
Fax: (450) 437-2338

MANUFACTURING FACILITIES

Site Manufactured

  1. SPECIFIC CONDITIONS

    1. The use of Airmetic® 0223/Heatlok® 0240 - Air Barrier Material, is approved in respect to the requirements contained in Sentence 5.4.1.2.(1) and Appendix A-9.25.3.2., of Ontario Regulations 403/97, as amended or remade from time to time (the "Ontario Building Code");
    2. The use of Airmetic® 0223/Heatlok® 0240 - Air Barrier Material must comply with the Building Code Act, 1992; and except as specifically provided otherwise in this Ruling, with the Ontario Building Code;
    3. The use of Airmetic® 0223/Heatlok® 0240 - Air Barrier Material, must be in accordance with Canadian Construction Materials Centre ("CCMC") Evaluation Report No. CCMC 12893-R (the "Evaluation Report"), issued on January 12,1999, provided that references in the Evaluation Report to Sentences 5.4.1.2.(1) & Appendix A-9.25.3.2., 9.25.1.2., 9.25.2.3., 9.25.3.1., 9.25.3.2., 9.25.3.3., Table 9.25.1.2., & Subsection 9.10.15. of the National Building Code of Canada, 1995, shall be deemed to be references to Sentence 5.4.1.2.(1) and Appendix A 9.25.3.2., Sentences 5.5.1.2.(1), 9.25.3.2.(1), 9.25.4.2.(1) & (2), Articles 9.25.1.2., 9.25.3.3., Table 9.25.1.2., and Subsection 9.10.15 of the Ontario Building Code;
    4. A copy of this Ruling shall be attached to the application for a building permit; and
    5. This Ruling is valid only for Airmetic® 0223/Heatlok® 0240 - Air Barrier Material manufactured at the facilities outlined in Section 2, ("Manufacturing Facilities") of this Ruling.

  2. GENERAL CONDITIONS

    The Minister or his/her delegate may amend or revoke this Ruling if:

    1. the Evaluation Report is amended by the CCMC;
    2. the Evaluation Report expires in accordance with the CCMC's General Conditions for Evaluation Reports;
    3. the Evaluation Report is rendered void in accordance with the CCMC's General Conditions for Evaluation Reports by reason of alterations to products or relocation of manufacturing facilities described in the Evaluation Report, without prior agreement by the CCMC;
    4. the Evaluation Report is withdrawn by the CCMC in accordance with the CCMC's General Conditions for Evaluation Reports where, in the opinion of the CCMC:

      1. the level of performance, in-situ, of the product described in the Evaluation Report is unsatisfactory;
      2. the proponent of such product fails to fulfil its obligations as set out in the CCMC's General Conditions for Evaluation Reports; or
      3. such product may pose any danger to the health or safety of the user of such product;

    5. the Minister or his/her delegate determines that the use of the material, system or building design authorised by this Ruling:

      1. will not comply with the Building Code Act, 1992, or any relevant law as they may be amended or reenacted from time to time; or
      2. provides an unsatisfactory level of performance, in situ; or

    6. any Ontario Building Code provision relevant to this Ruling is amended or remade.

Dated at Toronto this 12th day in the month of November in the year 1999 on the behalf of:

DIRECTOR, HOUSING DEVELOPMENT AND BUILDINGS BRANCH